Overview
The Inspection Parameters are the codes and their descriptions the USER will selected from the pop-up lists when they create or edit an Inspection or Calibration Request within the QUALITY Tab.

1 – Inspection Type – this code is used to describe the type of investigation required for a piece of equipment or tool. To set-up the codes and descriptions – click on the ‘Data Set’ and select “Insp/Cal Type’ from the list. Click in the “Code” field and create a code, press <TAB> and enter description and press <F9> to save.

Repeat process as necessary.

Opto Software Pty Ltd
Revised: 20/12/24